a.Appearance of obverse welding side beautiful and uniform, excess weld metal is less than 1mm, the width deviation is less than 1 mm. | |||||||
b.100% weld penetration, appearance of obverse welding side beautiful and uniform, excess weld metal deviation is small. | |||||||
c Make sure not break the arc during the welding process. | |||||||
d Plate surface can't scratch. | |||||||
e Ensure within 30 mm near the weld seam and the weld seam without oil, burr, rust and other defects. | |||||||
f The gap between two plates less than 1mm; Unfitness of butt joint is less than 10% of the plate thickness. | |||||||
g Must add arc starting and arc stopping plate. |
Effective Welding Length | 8000mm | ||||
Welding Metal Base | Aluminium alloy | ||||
Thickness of the Metal Base |
3-7mm(Make groove if the thickness of plate more than 6mm) |
||||
Welding process | Tig | ||||
Arc control | The arc voltage automatic tracking system | ||||
Effect of the Welding Seam |
One-Side is Welded; Two Sides are Shaped. (No need open groove) | ||||
Way of Pressing the Work Piece | The Cylinder Keyboard Pressed | ||||
Welding speed | 50-300mm/min | ||||
Molding groove material | Stainless steel(double groove,Three sections of arc transition, groove depth is 2mm) | ||||
Molding groove cooling type |
Water cooling |
||||
Travel speed (empty) |
Infinitely variable speeds(The adjusting range is 0 to 4000 mm/min) | ||||
Welding torch quantity | 1 set | ||||
Positioning device | 4 sets | ||||
Electric feeding device | 4 sets | ||||
Electric discharging device | 4 sets | ||||
Effect of the Welding Seam |
One-Side is Welded; Two Sides are Shaped. |
||||
Power voltage | AC380 50HZ | ||||
Machine power | 30KW |
Grupo de Produto : Máquina de solda